2020 Chevrolet Equinox SERVICE BRAKES,ENGINE

Vehicle brakes became hard and failed to stop, check engine light came on and warning saying reduced engine power. Vacuum pump seized and broke off in the crankshaft. After vacuum pump replacement vehicle failed to start multiple times. Vehicle started and had rough idle and stalled multiple times. Currently awaiting dealer inspection.

While driving on the freeway at 75 mph my vacuum pump seized and shattered, causing me to loose all breaking power, damaging my engine beyond repair and endangering my life and numerous other drivers on the road. There is a current recall on the particular year, make and model for this issue but my VIN is not included so the dealership refuses to fix the issue.

The vacuum pump broke and caused the brake booster to lose vacuum and made the brakes hard and almost caused an accident.

The vaccum pump seized which is connected to the camshaft which broke causing the timing chain to break. This caused the vehicle to lose breaking g power and almost wreck.

I put the vehicle into reverse to back in into my garage when it suddenly lurched forward and hit the garage door on the garage across the alley. There was damage to the garage and the car's front end. It has never done anything like this before.

We were driving on the highway and just exited. My husband hit the brakes and the pedal was hard to push. He basically had to put all his weight on the pedal in order to slow down. Once we were able to stop completely, we got the 2020 Chevy Equinox looked at and we were told that the vacuum pump that is attached the the cam shift exploded and pieces were in the engine. This has caused approx. $3000 in damage that me and my husband can't afford. The vehicle is still at Classic Chevrolet in Grapevine. We are going to have to tow it back to my brothers until we can afford the payment to fix it.

The Vacuum pump has exploded 3 times, twice under warranty and now outside warranty. This time it has taken out the camshaft.

Experienced brake issues in March of 2022, brake pedal became extremely stiff and difficult to use. Bulletin showed an issue with vacuum brake pump and that was replaced with the exact same faulty part. On 12/28/2023 my engine blew in the middle of the road, leaving myself and my children stranded as I could not shift the vehicle out of neutral for quite sometime. The faulty vacuum brake pump caused the cam to break off the shaft- resulting in debris inside the engine.

I was traveling the interstate I90/94 , merged to the exit ramp and found the brake pedal hard and unable to push to brake. I had to slide the car into neutral and use two feet on the brake pedal to slow down enough to make the corner at the end of the off ramp. All due to a faulty vacuum pump. The debris from the exploded vacuum pump were sent through the engine. And after having the car fixed it now uses about a quart of oil every 500 miles. Engine is shot! Seriously bad engineering design that will kill someone if it hasn't already. I am 5'11" and weigh 190 lbs. I estimate it took around 200-250 lbs of force to push the pedal to even start to slow. If I hadn't had over 40 years of driving experience, this would have ended in a catastrophic incident.

While driving the Brake pedal became very hard to press and stopping distance increased greatly. the check engine light and service brake light on the dash became illuminated. After looking online it became apparent that there are a lot of people with Chevrolet vehicles equipped with the 1.5L engine that had the same problem and the cause was a faulty vacuum pump. I removed the vacuum pump and it has broken pieces that have fallen off of it and are now inside of the engine and will need more engine components removed to have access to remove all of the metal fragments.

TL* THE CONTACT OWNS A 2020 CHEVROLET EQUINOX. WHILE DRIVING 5 MPH, THE BRAKE PEDAL WAS DEPRESSED AND THE VEHICLE STARTED TO SHAKE EXCESSIVELY. THE CHECK ENGINE WARNING LIGHT AND TRACTION CONTROL WARNING LIGHT WERE ILLUMINATED. THE VEHICLE WAS TAKEN TO JIM TRENARY CHEVROLET LOCATED AT 501 AUTO MALL DR, O'FALLON, MO 63368, WHERE A DIAGNOSTIC TEST AND REPAIR WAS STILL PENDING. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 400. THE VIN WAS NOT AVAILABLE.