1998 Ford F-250 Suspension

BROKEN FRONT TORSION BAR. STARTED MOTOR, SHIFTED FROM PARK TO REVERSE, AND WITHOUT MOVING FROM THE SPOT, HEARD A LOUD CRACK AND THE TORSION BAR HAD SNAPPED. MY GARAGE WAS TOLD BY THEIR PARTS SUPPLIER THAT, UNTIL THIS PAST MONTH, THEY NEVER HAD A REQUEST FOR THIS PART BEFORE. THIS IS NOW THE SECOND REQUEST IN THE PAST MONTH. KEPT THE BROKEN BAR AFTER REPLACEMENT.

WHILE DRIVING, THE REAR SUSPENSION SNAPPED. THE CONSUMER MANAGED TO PULL OVER AND HAD THE VEHICLE TOWED. THE DEALERSHIP TRIED TO REPAIR THE PROBLEM ONCE BEFORE, BUT THE PROBLEM WAS NOT RESOLVED. *AK THREE AIR SUSPENSION BAGS HAD BLOWN OUT SINCE THE CONSUMER PURCHASED THE VEHICLE. (RIGHT AIRBAG ON THE REAR SUSPENSION) *SCC *JB

I HAVE A 1998 F-250 LIGHT DUTY PICKUP WITH REAR AIR BAG SUSPENSION. THE AIR BAGS HAVE FAILED 3 TIMES IN THE LAST 18 MONTHS. I WAS HOPING THERE WAS A RECALL OR SOMETHING FROM FORD TO FIX THIS PROBLEM, I AM GETTING TIRED OF REPLACING THESE THINGS AT $500 A PIECE. *JB

WHILE DRIVING TORSION BAR BROKE WHICH ALMOST CAUSE A CRASH. CURRENTLY AT DEALER. *AK THE MANUFACTURER FIXED THE TORSION BAR. *YH

TORSION BAR KEEPS BRAKING FIRST ON DRIVER'S SIDE AT 35000 WHICH COULD CAUSE FRONT END TO DROP, THEN ON PASSENGER'S SIDE.*AK TORSION BAR BROKE TWICE IN THE SAME YEAR. FRONT END DROPPING AT HIGH SPEED COULD CAUSE THE VEHICLE TO ROLLOVER. *YH

BREAKAGE OCCURRED EITHER WHILE STATIONARY OR DOING SLOW SPEED - NOT SURE WHEN. VEHICLE WAS LEANING TO RIGHT WHEN I RETURNED TO IT 20 MINUTES AFTER DRIVING IT. FEEL FREE TO CALL FOR MORE INFORMATION. I SEE ON THE WEB THAT THESE TORSION BARS HAVE BEEN BREAKING QUITE FREQUENTLY ON F150S TOO! *AK

FRONT END TIRES AND STEERING SHAKE CONSTANTLY AND AT HIGHWAY SPEED IT VIBRATES AND SHAKES SO HARD OVER 50 MPH IT IS HAD TO HOLD ON ROAD. TIRES ARE WEARING DUE TO SHAKING. VEHICLE HAS HAD NEW TIRES, BALANCING, FRONT END ALIGNMENT, MORE THAN ONCE. *AK

BOTH FRONT TORSION BARS BROKE WHILE VEHICLE WAS SETTING IN THE GARAGE. IT APPEARS TO BE RELATED TO COLD WEATHER STRESS OR THE TORSIONS BARS WERE HEAT TREATED TO HARD. DID NOT FLEX BETWEEN THE COLD WEATHER (0 -10 DEG) AND THE WARM GARAGE (45 DEG

TORSION BARS FAILED. YH