2017 Nissan Frontier Engine

I had a check engine light come on and took it to my mechanic for diagnosis and repair if needed. He diagnosed it as error code P2004. The code indicated a bad runner control valve position sensor. It is located on the end of intake manifold and has two torx screws to remove it. The issue is Nissan did not sell a replacement sensor separately , you can only get that part with the purchase of a whole new intake manifold. This same sensor issue exists on the 2017 Nissan Rogue with service bulletin NTB17-091. My truck is also a 2017 but the specific vehicle is a Nissan Frontier not a Rogue but the failure is identical. In that service bulletin the solution was to replace the sensor which did not require the purchase of the entire intake manifold. I would like Nissan to issue a refund for the intake manifold as the same condition exists with the same year Nissan Rogue and they sell that part separate from the intake manifold.

WHILE DRIVING ON A COUNTY HIGHWAY, THE ENGINE CAUGHT FIRE FOR NO APPARENT REASON RESULTING IN THE TOTAL LOSS OF THE VEHICLE. ENGINE COMPARTMENT WAS COMPLETELY DESTROYED. ABOUT 2100 MILES ON ODOMETER, SPEED AT TIME OF FIRE WAS ABOUT 30 MPH. I HAD BEEN DRIVING ABOUT 5 MINUTES, JUST LONG ENOUGH FOR THE ENGINE TO WARM UP. I CHECKED THE OIL ABOUT 1 WEEK PRIOR TO THE FIRE AND READING WAS NORMAL. NO PROBLEMS STARTING THE VEHICLE AND IT WAS RUNNING NORMALLY UNTIL THE FLAMES ERUPTED FROM UNDER THE HOOD. NO INJURIES OR OTHER PROPERTY DAMAGE.