2019 Jeep Cherokee Engine

Engine started running rough, MIL light came on and flashing after 10 minutes of highway driving. Found code P0300 for random misfire, monitors cylinder misfire with scan tool and found cylinders 1 and 2 misfiring. Tested coils, checked spark plugs and tested fuel injectors, no issues found. Performed compression test and found cylinders 1 and 2 with 8-15psi. 3rd and 4th cylinders at 160 psi. Engine teardown needed, used engine prices are high hinting this is happening often. Vehicle had 73,389 miles and been maintained well.

The car turned off and the battery light came on. The engine then was out of oil and all the engine oil burned up prior to the oil change light coming on or signaling that the car was out of oil.

Engine broke on 2019 jeep Cherokee limited with only 90,000 miles after the intake broke at 50,000

08/31/2023 my car was overheating and making a gurgling sound. I took it to a shop 9/1/2023, got it inspected and it was the heater hose. It got fixed. Now 8 months later this month 5/20/2024 my Jeep is having same issues with the car overheating. This is really risky for me especially when I take my daughter and nieces to school. I use my car to get to work. It is currently getting inspected again. I'm concern if this is a problem with the coolant system in all? I got this Jeep used at a dealership 10/2022. I have been googling what can I do, if there is a possibility that it has a recall? I came across this website. If someone can help me please. Thank you!

The contact owns a 2019 Jeep Cherokee. The contact stated that the vehicle had experienced excessive oil consumption. The vehicle was taken to the dealer, where an oil consumption test was performed. The dealer determined that the engine needed to be replaced and related the failure to Chrysler Campaign Number: W80. The vehicle was repaired under Chrysler Campaign Number: W80. The manufacturer was notified of the failure. The failure mileage was approximately 3,000.

What component or system failed or malfunctioned, and is it available for inspection upon request? Engine, yes. has not been repaired yet While driving on the freeway between Phoenix and Flagstaff at around 75mph (speed limit). The engine completely failed causing me to have to pull over to the side of the road on a hill, luckly there was enough of a shoulder on the road to pull off safely and await a tow. Car would not start after the engine failed. Upon towing the car to a dealership I was informed that they found metal through the engine and it will require the engine to be replaced. Engine type 2.0L turbo Milage: ~46k

The contact owns a 2019 Jeep Grand Cherokee. The contact stated while driving at approximately 75 MPH, the vehicle stalled. The check engine warning light was illuminated. The vehicle was towed to a local independent mechanic where it was diagnosed that the engine needed to be replaced. The vehicle was then towed to a local dealer where it was diagnosed that there was an oil leak into the engine causing two cylinders to fail. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 59,400.

Incident date/time: [XXX] MDT*Year, make, model: 2019 Jeep Cherokee Latitude Upland 4X4 3.2L V6 F/I Gas 4D SUV*Odometer when incident occurred: 80,358*Injuries: No*Failed or malfunctioned component or system: Engine*Warning lamps, messages or other symptoms of the problem prior to incident: No*Recent maintenance history, date and location: Routine maintenance, inspections, oil, lube*Last oil change, location and mileage: DEC 2023, Hot Springs, SD, odometer 78,653*To and from travel details: Traveling home to Hot Springs, SD from Henderson, NV after grandmother passing*Incident location: [XXX] Wamsutter, WY*Incident details, include velocity, vehicle load/trailering/towing, road conditions:*[XXX], fair weather, snow, plows in service that day on interstate, velocity 70MPH, left lane behind tractor trailer passing a slower tractor trailer in the right lane when incident occurred, observed and heard roadway obstruction/debris struck one mile prior to failure, unknown obstruction/debris type, no malfunction indicator lights, no information on dash heads-up display, no indication of an issue present or imminent; normal load, not pulling/trailering, slight (<1% grade) incline, road straight; Jeep performing normally prior to incident; without warning, a "pop" was heard in the cabin, smoke billowed from under the hood and rear of vehicle and immediate powertrain failure; malfunction indicator light indicates engine issue, heads-up display flashes performance, oil pressure, stability and traction control failure warnings, engine power ceased, operator safely maneuvers from left lane to shoulder; visual inspection reveals engine oil loss, engine block rod part observable at the bottom of engine compartment; incident documented, photographed, reported to insurance and warranty*Problem confirmed by dealer shop, inspected by insurance and warranty companies - blown motor, undetermined*Past PCV issues possible cause. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2019 Jeep Cherokee Altitude. The contact stated that his daughter was driving at approximately 70 MPH when the vehicle stalled. The contact stated that no warning lights were illuminated prior to the failure. The vehicle was towed to an independent mechanic, where it was diagnosed that a connecting rod had punctured the engine block, and the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 40,507.

Engine oil cooler cracked allowing oil to be leaked onto the ground, all over vehicle, and also back flowing into the radiator. This is a know problem due to the fact that oil cooler is plastic. This issue is a potential fire hazard and could contaminate the ground. The issue is hard to locate.

Total loss of motive power at 50MPH. Independent mechanic diagnostics report check engine light code P0EA7 “Auxiliary Cooling System Performance”. Independent mechanic diagnostics, determined no compression in cylinder 1.

The contact owns a 2019 Jeep Cherokee. The contact stated that while her niece was driving at an undisclosed speed, the vehicle lost motive power and was unable to accelerate above 60 MPH. The check engine warning light was illuminated. The vehicle was taken to the dealer, who determined that there was a misfire in cylinder #2. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 18V344000 (Engine and Engine Cooling) but the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was 83,000.

The contact's daughter owns a 2019 Jeep Cherokee. The contact stated while driving at various speeds, there was an abnormal sound coming from underneath the vehicle. There was no warning light illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that there was a crack in the exhaust pipe and that the exhaust system needed to be replaced. The vehicle was not repaired. The dealer was notified of the failure and advised the contact that the VIN was not included in a recall related to the failure. The manufacturer was not notified of the failure. The failure mileage was approximately 41,000.

The contact owns a 2019 Jeep Cherokee. The contact stated while driving approximately 20 MPH, the vehicle decelerated, lost motive power, and stalled. The contact stated that the oil and battery warning lights were illuminated. The vehicle was able to restart after several attempts. The vehicle was taken to the dealer that the vehicle was purchased. The Kia dealer was unable to diagnose the vehicle and determine the cause of the failure. The vehicle was then sent to an unknown Jeep dealer where the vehicle was awaiting diagnostic testing. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.

We were driving down the road at about 60MPH and the engine just quite running. With the flow of traffic, I was almost hit in the rear end, but I was able to safely move to the shoulder of the road. The car would not restart and we had it towed to dealer. The dealer informed me it needed a new engine. Upon inspection and removal of the head of the engine, the #3 cylinder piston was melted and had zero compression and the #1 cylinder piston was partially melted and had zero compression as well. All regular maintenance was performed on the vehicle. We have the 2.0l vin N. No warning lights or codes were illuminated or present at the time of or after the incident.

Driving with my children and car started to shake a little when getting on highway, while on car started shaking violently and felt was going to die. I had to drive like that to get to an exit and was able to pull over. Turned the car off and turned back on. And same, then check engine light came on but not flashing. After getting it to a mechanic and the dealer was told my cylinder blew. And the engine is done. Felt that was a safety risk for me to driving with my children like that and now we are without a car. If someone maintains their car and gets regular oil checks then how is it possible for an engine to blow.

I was driving my 2019 jeep cherokee on a very busy road when my car came to a screeching stop while in drive and began grinding it would only go in reverse the transmission blew it only has 23000 miles on it currently it is a big safety concern

Engine shut off unexpectedly, with no indication of a problem existed. After Jeep certified mechanic diagnosis, cylinder #2 failed. Results, engine failure, engine replacement. 63900 miles on odometer.

As accelerating to pass a vehicle, the car would not accelerate. When it eventually did, it was miss firing and still wouldn’t accelerate properly. This caused a hindrance to the flow of traffic and eventually lost complete power while on the highway. It was towed to an independent service center and he confirmed there was an issue with the engine, with no obvious fault of the driver. No warning lamps appeared prior to the failure of the engine.

When coming to a stop with engine running the car engine turns off

My Jeep Cherokee stalled as I approached a stop light. I was able to restart.

The engine shuts off a lights and during turning on occasion presenting a very dangerous situation. This seems common in these jeeps

The contact owns a 2019 Jeep Cherokee. The contact stated while the vehicle was at a complete stop at a traffic light, the vehicle failed to shift into the intended gear and the vehicle stalled. The contact was able to restart the vehicle, and the vehicle responded as needed; however, the failure reoccurred while at another complete stop. Additionally, the contact stated that the vehicle hesitated to respond while driving from a complete stop. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed nor repaired. The failure mileage was approximately 80,000.

The engine has failed. The cylinder has low compression and the engine misfires and can no longer be ran. When the incident first happened we were left on the side of a busy interstate 3 hours away from home. Upon doing some research MANY other Jeep Cherokee owners for my years make and model have reported the same problem. There was ABSOLUTLEY no warning before the issue arose. We were then left with a hefty car loan for a vehicle that no longer runs. We got two opinions from two mechanics of which both said it’s a manufacture problem and that we did not cause the issue. It would cost 8k or more to fix the problem.

Svr 4x4 transmission issue